FHP24-12-1RB Gas Radiant Char Broiler & Griddle Combo Unit

CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel finish, welded with angle iron and aluminized inner framing. Sturdy 4'' heavy duty stainless pipe legs with adjustable feet. Stainless steel bullnoserail is functional on which to set plates or utensils and also serves as control protection. Double wall construction with heavy insulation for cooler operation. Installation clearances for non-combustible surfaces are 0'' on the sides and 4'' in the rear. Char-broilers are approved for use in non-combustible locations only. CONTROLS: Equipped with brass gas valves and automatic standing pilots. Pressure regulators are set at the factory for the gas specified BURNERS: 12'' incremental griddle & char-broiler models feature cast iron H pattern burners, one for each 12'' increment; griddles are rated at 20,000 BTU ea. & char-broilers at 25,000 ea. 18'' and 30'' griddle & charbroiler sections feature 2 and 4 straight burners respectively; griddles are rated at 18,000 BTU ea. & char-broilers at 20,000 ea. CHAR-GRATES: Cast iron top grate sections measure 20.5'' deep, designed with cast-in grease trough on each blade to allow grease run off into the front cold zone grease trough and reduces flare up. Each section is reversible for sloped or level grilling. Stainless steel splash guards on 3 sides graduating up to 4'' high. Grease drain slot is 3.5'' x 1'' and feeds into a large, removable grease drawer. RADIANTS: Char-broiler radiants are heavy duty angle iron, inverted V type for superior uniform heating temperature. V type radiants are easily removable for cleaning. Radiant style broiling reduces flare-ups and smoke emmissions while maintaining great smokey broiled flavor GRIDDLE PLATE: Highly polished to minimize food sticking. 3/4'' thick plate is standard 4'' high splash guard is standard. 21 1/4'' deep cooking surface with front cold zone grease trough. Grease drain slot is 3.5'' x 1'' Seamless, deep,